Overhead Crane Servicing & Inspections Sydney
Your cranes are the backbone of your operation — but when they stop, so does your site.
At RKA Industrial Solutions, we take care of crane servicing and inspections so you stay compliant, safe, and productive without the stress of chasing providers or guessing where you stand.
What Do We Do in a Crane Inspection?
Our inspections are carried out to AS 2550.1 and AS 1418 standards, covering every critical aspect of your crane:
Structural components – beams, end carriages, welds, and supports.
Mechanical systems – hoists, gears, ropes, brakes, and hooks.
Electrical & controls – panels, wiring, safety interlocks, and limit switches.
Runway & alignment checks – ensuring smooth travel and safe operation.
Safety devices – overload protection, emergency stops, and indicators.
You’ll receive a digital compliance report after every inspection, with clear findings and recommendations.
Why Do I Need My Cranes Inspected?
Because inspections are more than just a legal requirement — they’re your first line of defence against accidents, breakdowns, and downtime.
Regular crane inspections:
Keep your site compliant with Australian Standards and Work Health & Safety legislation.
Identify issues early before they turn into costly failures.
Protect your team from dangerous equipment faults.
Extend the life of your crane through proactive maintenance.
Australian Standards for Crane Inspections
We conduct all inspections and servicing in line with:
AS 2550.1 – Cranes, Hoists and Winches: Safe Use – General Requirements.
AS 1418 – Cranes, Hoists and Winches – Design and Construction.
Work Health & Safety Regulations – requiring cranes and lifting equipment to be maintained and inspected for safe operation.
These standards make inspections not optional, but mandatory for businesses operating lifting equipment in Australia.
What Are the Risks If I Don’t Get My Crane Inspected?
Workplace accidents – caused by undetected wear, fatigue, or failure.
Non-compliance penalties – fines, shutdowns, and legal consequences.
Unplanned downtime – costly breakdowns that stop production.
Insurance issues – claims may be denied if equipment isn’t compliant.
Reputation damage – both internally with management and externally with clients.
How Often Do I Need My Cranes Inspected?
Inspection frequency depends on the classification, usage, and environment of your crane. Below is a general guide based on AS 2550.3, which applies specifically to bridge and gantry cranes.
Crane Classification | Typical Usage | Inspection Frequency |
|---|---|---|
Light Duty (e.g., workshop jib crane) | Infrequent lifts, light loads | Minimum 12-weekly (quarterly) |
Moderate Duty (e.g., small gantry crane) | Regular lifts, moderate loads | Minimum 12-weekly (quarterly) |
Heavy Duty (e.g., overhead crane in fabrication plant) | Frequent lifts, near max capacity | Minimum 12-weekly (quarterly) |
Severe Duty (e.g., steel mill, high heat/dust) | Continuous lifts, harsh conditions | Minimum 12-weekly (quarterly) |
Key Notes
AS 2550.3 specifies a minimum of 12-weekly inspections, regardless of duty class.
More frequent inspections may be needed if cranes operate in severe or high-risk environments.
Third-party inspections are optional under AS 2550.3, not mandatory.
We will work with you to create a tailored compliance plan based on your crane class, operational environment, and site-specific risks.
What Are the Benefits of Getting My Cranes Inspected?
Reduced downtime – problems are fixed before they cause breakdowns.
Compliance confidence – inspections and reports ready for audits.
Better safety – fewer risks for operators and workers on site.
Extended equipment life – maximise the return on your crane investment.
Peace of mind – one less thing for you to worry about.
Want to know how much your next inspection or service will cost?
➡️ Get an instant estimate sent straight to your inbox today.